- Panasonic PoE type indoor network camera - Indoor use only - Can be viewed and controlled from a standard Web browser, video display, or even a compatiblecell phone or PDA - Place them in your home, office, vacation home or almost anywhere else that you'd like to keep an eye on things, with no PC required on location - Easy to install and operateand require no additional software for the PC that you're viewing them on - Each camera also comes with a free Web address, which can track the camera automatically. All you need is a regular Web browser to view them on your PC, as all of the other required software, including control software (TCP/UDP) and e-mail software (SMTP), is already inside the camera - Megapixel camera and can capture images in stunning 1280x1024 resolution - Alsofeatures Adaptive Contrast Enhancement helping toeliviate the problems of shadows and allowing fora brighter image - Allows for an external microphone and amp-equipped speaker, both optional, enabling two-way voice communication (transceiver system) between the network camera and a PC used to monitor the camera image - In addition to conventional monitoring of images and sound, voice messages can be transmitted from the PC to the network camera. Voice transmission and reception can be switched easily from the PC used to monitor the image. - CCD (Charged Couple Device) for sharp, enhanced image expression - Image refreshing speed (maximum) has been increased to 30 images per second for smoother displays of moving images - SD Memory Card slot for recording images and audio captured by the network camera directly onto an SD Memory Card (sold separately) - Attached through anEthernet connection (or router) and powered by PoE (power over ethernet). You don't need a computerat each location you want monitored. Each camera has a built-in Web server with IP address. To viewthe camera's images on a PC, simply open a graphics-capable Web browser and type in the cameras specified Internet address (password optional). - Using a standard Web browser, video display, or even a compatible cell phone or PDA, you can control the movement of the camera. You can Pan/Tilt the camera. You can also assign a "Home Position" that allows you to return the camera to a pre-designated shooting position. Up to eight shooting positions can be registered in advance, so you can aim thecamera exactly where you want it. You can also click on the part of the image you want to see, and automatically bring that part to the center of thescreen. - Streams both MPEG4 and MJPEG allowingthe viewer to favor viewing the feed from the standpoint of a more clearer image or a more fluid movement from frame to frame using less bandwidth for a given frame rate. - Can be set to automatically record video at certain times and certain speeds. In addition, with optional, external sensors attached to the camera, it is possible for the camera to email or record when triggered by motion, sound, light, timer, or even a push button. These convenient functions eliminate your need to constantly check the image. - With the built-in motion sensor, the camera can be set to record and/or notify you by email when someone enters the room. It can even automatically move to a preset location when triggered, just in case someone was viewing a different part of the room - 1280x1024 megapixel recording - Adaptive contrast enhanced - Remote pan, tilt, and zoom control - AC adapter not included (see KX-BB-HCA3A) - Gray
TekGems · 2588 Mission St, Ste 212 · San Francisco, CA 94110 Sales Line (415) 503-9089 · Free Fax (866) 233-9656 · Contact Us · Site Search Phone Order Minimum Is $25 Before Shipping.
Comments
There are currently 0 comments to display.